Research professors
Education
09/2008 - 07/2014 Southeast University Materials Science and Engineering PhD
09/2004 - 06/2008 Nanjing Tech University Metallic Materials Engineering Bachelor
Professional Experience
10/2023 - Present Hohai University College of Mechanics and Materials Associate Professor
01/2017 -10/2023 Hohai University College of Mechanics and Materials Assistant Professor
12/2014 - 12/2016 Hohai University College of Mechanics and Materials Post-doctor
Research Areas and Sponsors
aluminum alloys and aluminum matrix composites with high strength and ductility
high-strengthandhigh-conductivityCu-Fealloyswith electromagnetic shielding performance
Research funded by National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, Central Universities, China Postdoctoral Science Foundation, Jiangsu Postdoctoral Science Foundation et al.
Courses Taught
Fundamentals of Materials Science
Fundamentals of Mechanical Design
Corrosion and Protection of Materials
Publications
Yuna Wu*, Wangjun Zhang, Yun Li, Fei Yang(*), Huan Liu, Jin Zou, Jinghua Jiang, Feng Fang(*), Aibin Ma, An overview of microstructure regulation treatment of Cu-Fe alloys toimprove strength, conductivity, and electromagnetic shielding, Journal of Alloys and Compounds, 1002 (2024) 175425.
Yumeng Chen, Yuna Wu*, Jun. Geng, Huan Liu, Dan Song, Jinghua Jiang, Feng Fang*, Aibin Ma, Pre-precipitating promoted by microshear bands effectively circumvents strength-ductility trade-off of RT-rolled Al-6Zn-1Mg alloy, Journal of Materials Research and Technology, 28 (2024) 2767-2777.
Yumeng Chen, Yuna Wu*, Yun Li, Zhiyang Peng, Huan Liu, Aibin Ma, Jinghua Jiang, Ting Yuan*, RT ECAP and rolling bestow high strength and good ductility on a low lithium aluminum alloy, Journal of Materials Research and Technology, 25 (2023) 5561-5574.
Xiaoru Zhuo, Quan Zhang, Huan Liu, Zhichao Hu, Peng Zhang, Jinghua Jiang, Aibin Ma, Yuna Wu*, Enhanced tensile strength and ductility of an Al-6Si-3Cu alloy processed by room temperature rolling, Journal of Alloys & Compounds, 899 (2022) 163321.
Quan Zhang, Yuna Wu*, Tianfei Li, Chao Qiu, Shengqing Wang, Fujun Fan, Hang Teng, Changmei Liu, Huan Liu, Aibin Ma, Jinghua Jiang, Significant enhancement in tensile strength of room-temperature rolled Al-8Zn-1Mg alloy induced by profuse microbands, Materials Science and Engineering A, 861 (2022) 144359.
Hengcheng Liao*, Yuna Wu*, H. Chen, L. Qian, Divorced eutectic solidification in hypereutectic Al-Si Alloys, Metallurgical and Materials Transactions A, 53 (2022) 2346-2350.
Xiaoru Zhuo, Haichao Xu, Yuna Wu*, Zhichao Hu, Jinghua Jiang, Aibin Ma, Effect of eutectic Si size on the flow behavior and hot processing map of near eutectic Al-Si alloys, Journal of Materials Research and Technology, 15 (2021) 5694-5705.
Yuna Wu, Changmei. Liu, Hengcheng Liao*, Jinghua Jiang*, Aibin Ma, Joint effect of micro-sized Si particles and nano-sized dispersoids on the flow behavior and dynamic recrystallization of near-eutectic Al-Si based alloys during hot compression, Journal of Alloys & Compounds, 856 (2021) 158072.
Yuna Wu, Hengcheng Liao*, Yunyi Tang, Enhanced high-cycle fatigue strength of Al-12Si-4Cu-1.2Mn-T6 cast aluminum alloy at room temperature and 350℃, Materials Science and Engineering A, 825 (2021) 141917.
Yuna Wu, Hengcheng Liao*, Changelve Lv, Dynamic precipitation and recrystallization in Al-12.5wt%Si-0.6wt%Mg-0.1wt%Ti alloy during hot-rolling and their impacts on mechanical properties, Journal of Alloys & Compounds, 788 (2019) 125-135.
Yuna Wu, Jianfeng Zhang*, Hengcheng Liao, Gaiye. Li, Development of high performance neareutectic Al-Si-Mg alloy profile by micro alloying with Ti, Journal of Alloys & Compounds, 660 (2016) 141-147.
Yuna Wu, Jianfeng Zhang*, Hengcheng Liao, Yongjin. Wang, Yuping. Wu, Effect of Homogenization Temperature on Microstructure and Conductivity of Al-Mg-Si-Ce Alloy, Journal of Materials Engineering and Performance, 25 (2016) 2720-2726.
Yuna Wu, Hengcheng Lia*o, Kexin Zhou, Jian Yang, Effect of texture evolution on mechanical properties of near eutectic Al-Si-Mg alloy with minor addition of Zr/V during hot extrusion, Materials & Design. 57 (2014) 416-420.
Yuna Wu, Hengcheng Liao*, Kexin Zhou, Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al-Si-Mg alloy, Materials Science and Engineering A. 602 (2014) 41-48.
Yuna Wu, Hengcheng Liao*, Kexin. Zhou, Dynamic precipitation of Mg2Si induced by temperature and strain during hot extrusion and its impact on microstructure and mechanical properties of near eutectic Al-Si-Mg-V alloy, Materials Science and Engineering A, 614 (2014) 162-170.
Yuna Wu, Hengcheng Liao*, Corrosion Behavior of Extruded near Eutectic Al-Si-Mg and 6063 Alloys, Journal of Materials Science & Technology. 29 (2013) 380-386.
Yuna Wu, Hengcheng Liao*, Jian Yang, Investigation on corrosion behavior of as-extruded near eutectic Al-Si-Mg alloy by neutral salt spray test, China Foundry. 10 (2013) 207-212.
Yuna Wu, Hengcheng Liao*, Kexin. Zhou, Effect of Si content on dynamic recrystallization of Al-Si-Mg alloys during hot extrusion, Journal of Materials Science & Technology, 30 (2014) 1271-1277.
Yuna Wu, Hengcheng Liao*, Jianfeng Zhang, Effect of Intermediate Annealing Temperature and Aging on the Mechanical Properties and Conductivity of Al-0.2Mg-0.35Si-0.3Ce Wire Rod, Springer-Verlag Singapore Pte Ltd, Singapore, 2018. (ISTP)
Yuna Wu*, Hengcheng Liao, Jian Yang, Effect of Quenching Wait Time on Microstructure and Mechanical Properties of As-extruded AA6063 Alloy, ICAA13: 13th International Conference on Aluminum Alloys, Wiley Online Library, Pittsburgh, 2012, pp.1593-1598. (ISTP)
Hengcheng Liao*, Yuna Wu, Kexin Zhou, Jian Yang, Hot deformation behavior and processing map of Al-Si-Mg alloys containing different amount of silicon based on Gleebe-3500 hot compression simulation, Materials & Design, 65 (2015) 1091-1099.
Hengcheng Liao*, Yuna Wu, Yongjin Wang, Microstructure evolution of Al-0.35%Si-0.2%Mg alloy containing Ce during hot extrusion and its contributions to mechanical and conductive properties. Journal of Materials Engineering and Performance, 2015, 24 (0): 2503-2510.
Hengcheng Liao*, Yuna Wu, Ran Fan, Qigui Wang, Effect of Sr content on porosity formation in directionally solidified Al-12.3wt.%Si alloy. China Foundry, 2014, 11 (5): 435-439.
Hengcheng Liao*, Yuna Wu, Ke Ding, Hardening response and precipitation behavior of Al-7%Si-0.3%Mg alloy in a pre-aging process. Materials Science and Engineering A, 2013, 560 (0): 811-816.
Hengcheng Liao*, Yuna Wu, Ke Ding, Hardening response and precipitation behavior of Al-7%Si-0.3%Mg alloy, John Wiley & Sons, Chichester, 2012. (ISTP)
Yongjin Wang, Hengcheng Liao*, Yuna Wu, Effect of Si content on microstructure and mechanical properties of Al-Si-Mg alloys, Materials & Design, 53 (2014) 634-638.
Hengcheng Liao*, Lei Zhao, Yuna Wu, Ran Fan, Qigui Wang, Ye Pan, Investigation on Formation Mechanism of Irregular Shape Porosity in Hypoeutectic Aluminum Alloy by X-Ray Real Time Observation, Metallurgical and Materials Transactions A, 43A (2012) 2587-2590.
Ting Yuan, Jjinghua Jiang*, Aaibin Ma, Yuna Wu, Yuchun Yuan, Chen Li, Simultaneously improving the strength and ductility of an Al-5.5Mg-1.6Li-0.1Zr alloy via warm multi-pass ECAP, Materials Characterization, 151 (2019) 530-541.
International Conferences Attended
3rdForum of Materials Genome Engineering, 11/22/2019-11/24/2019, Kunming, China
14th International Conference on Nanostructured Materials, 06/24/2018-06/29/2018,HongKong, China
6th Chinese-Norwegian Symposium on Light Metals & New Energy, 12/03/2017-12/05/2017, Shanghai, China (Poster Presentation)
International Conference on Aluminum Alloys 13th (ICAA-13), 06/03/2012-06/07/2012, Pittsburgh, PA, USA (Oral Presentation)
