研究论文
203. Wang, X.L., Zhao, Y.H., Cheng, G., Zhang, Y., Venkatesh, T.A., Hydrogen adsorption in phase and grain boundaries of pearlitic steels and its effects on tensile strength. MRS Advances, 2022. 7(19): 383-387.
223. Liu, Y.F., Cao, Y., Liu, W., Mao, Q.Z., Zhou, H., Zhao, Y.H., Zhu, Y.T., Adiabatic shear localization induced by rotationally accelerated shot peening. Journal of Materials Science, 2023. 58(4): 1670-1679.
222. Wang, Q., Cao, Q.K., Wang, R., Wang, P.F., Zhao, Y.H., Li, S.J., Han, F.F., Influence of phosphorus based additives on nitrogen and sulfur pollutants emissions during densified biochar combustion. Energy, 2023. 275: 127442.
221. Ding, Z.G., Zhou, J.J., Zhao, Y.H., Liu, W., Accelerated exploration of high-performance multi-principal element alloys: data-driven high-throughput calculations and active learning method. Materials Research Letters, 2023. 11(8): 670.
220. Hu, J.J., Zhang, D.M., Hu, Z.H., Zhou, H.*, Zhao, Y.H.*, Mechanical properties and microstructure of heterogeneous commercial pure titanium prepared by rotary swaging and annealing. Journal of Materials Science, 2024. 59(22): 9645-9656.
237. Kan, J.C., Ding, Z.G.*, Chen, X., Hou, H.Y., Zhao, Y.H., Liu, W.*, A machine learning potential for simulation the dislocation behavior of magnesium. Journal of Magnesium and Alloys, 2024. https://doi.org/10.1016/j.jma.2024.11.009.
238. Mao, Q.Z., Li, Y.S.*, Zhou, Z.C., Zhao, Y.H.*, Zhu, Y.T., A new severe plastic deformation technique of combined extrusion and torsion to prepare bulk ultrafine grained copper. Journal of Materials Processing Technology, 2024. 333: 118600.
239. Meng, J.Q., Zhao, Y.H.*, Chen, X.F., Zhou, H.*, Zhu, Y.T.*, Impact of gradient microstructure on strain hardening via activation of multiple deformation mechanisms in CoCrNi medium entropy alloy. Materials Futures, 2024. 3(4): 041002.
240. Li, Y., Zhang, Q.C., Liang, F., Zhang, Y.P., Liu, W., Zhao, Y.H., Zhu, Y.T., Greiner, C., Gumbsch, P., Chen, X., Macroscopic low-friction via twinning assisted lattice reconstruction in magnesium. Acta Materialia, 2024. 271: 119888.
241. Wang, L.L., Cao, Y.*, Zhao, Y.H.*, Lattice distortion promotes incipient plasticity in multiprincipal element alloys. Nano Letters, 2024. 24(29): 9004-9010.
242. Mao, Q.Z., Wang, L., Nie, J.F., Zhao, Y.H.*, Optimizing strength and electrical conductivity of 6201 aluminum alloy wire through rotary swaging and aging processes. Journal of Materials Processing Technology, 2024. 331: 118497.
243. Xu, R.R.*, Li, Z.Y., Meng, A., Chen, X., Zhao, Y.H.*, Wear behavior and microstructure evolution of lamellar γ-TiAl alloy at room and elevated temperatures. Tribology International, 2024. 200: 110168.
244. Jiang, W., Wang, H., Zhao, Y.H.*, Low cycle fatigue and cycle hardening behavior of heterogeneous Ni2Co1Fe1V0.5Mo0.2 medium entropy alloy. Intermetallics, 2024. 175: 108473.
224. Nie, J.F., Zhi, Y.T., Fan, Y., Zhao, Y.H., Liu, X.F., One-step synthesis of high-entropy diborides with hierarchy structure and high hardness via aluminum-melt reaction method. Materials Research Letters, 2024. 12(2): 88-96.
225. Liu, Z., Nie, J.F.*, Zhao, Y.H.*, Effect of deformation processing on microstructure evolution and mechanical properties of Mg−Li alloys: A review. Transactions of Nonferrous Metals Society of China, 2024. 34(1): 1-25.
226. Sun, X.D., Nie, J.F.*, Zhao, Y.H., Significant improvement of the room and cryogenic mechanical properties of AlN particle reinforced Al matrix composite by alloying element magnesium. Composites Part B: Engineering, 2024. 268: 111056.
246. Gu, L., Zhao, Y.H.*, Li, Y., Liang, F., Zhang, R.S., Wu, Y.X., Fan, Y., Zhou, B., Chen, Y., Sha, G., Chen, G., Wang, Y.D., Chen, X.*, Ultrastrong and ductile medium-entropy alloys via hierarchical ordering. Science Advances. 10(22): eadn7553.
245. Fan, Y., Nie, J.F.*, Liu, S.D.*, Zhao, Y.H.*, A facile high-efficiency preparation strategy for Al-containing boride microcrystals with superior comprehensive performance. Journal of Materials Science & Technology, 2025. 204: 190-203.
227. Guo, F., Zhang, Y.L., Zheng, G.Q., Zhao, Y.H.*, Zhang, H.B.*, Multi-site synergistic hydrogen evolution reactions on porous homogeneous FeCoNiCu high-entropy alloys fabricated. Journal of Alloys and Compounds, 2024. 1002: 175356.
228. Zhou, K.X., Zhao, Y.H.*, Mao, Q.Z., Zhu, B.P., Sun, G.S., Li, S.Q., Liu, J.Z.*, Preparing bulk nanocrystalline Cu–Al alloys via rotary swaging. Journal of Materials Processing Technology, 2024. 330: 118489.
229. Hu, J.J., Zhang, D.M., Gao, B., Yin, D.D., Zhou, H.*, Zhao, Y.H.*, Improving the uniform elongation of ultrafine-grained pure titanium through judicious allocation of work hardening. Journal of Materials Processing Technology, 2024. 330: 118484.
230. Zhou, K.X., Zhao, Y.H.*, Dong, H.Z., Mao, Q.Z., Jin, S.B., Feng, M., Zhang, R.S., Li, S.Q., Liu, J.Z.*, Fractal structure and nano-precipitates break comprehensive performance limits of CuCrZr alloys. Nano Today, 2024. 56: 102234.
231. Hu, J.J., Zhang, D.M., Xiao, L.R., Zhou, H.*, Zhao, Y.H.*, Mechanical properties and microstructure of heterogeneous commercial pure titanium prepared by rotary swaging and annealing. Journal of Materials Science, 2024. 59(22): 9645-9656.
232. Liu, Z., Mao, Q.Z.*, Nie, J.F.*, Zhao, Y.H.*, Electrodeposition of nanocrystalline Ni and NiCr alloy coatings: Effects of Cr content on microhardness and wear resistance improvement. Journal of Materials Research and Technology, 2024. 30: 3584.
233. Zhou, K.X., Zhao, Y.H.*, Mao, Q.Z., Sun, G.S., Dong, H.Z., Gu, L., Liu, J.Z.*, Simultaneously enhancing strength and ductility of coarse grain Cu–Al alloy via a macro dual-cable structure. Composites Part B: Engineering, 2024. 276: 111371.
234. Mao, Q.Z., Liu, Y.F., Zhao, Y.H.*, A review on copper alloys with high strength and high electrical conductivity. Journal of Alloys and Compounds, 2024. 990: 174456.
235. Chen, Y.Y., Nie, J.F.*, Liu, X.F., Zhao, Y.H.*, Enhancing strength–ductility synergy of AlNp/Al composite by regulating heterostructure of matrix grain and particle distribution. Trans of Nonferrous Metals Society of China, 2024. 34(4): 1049.
236. Zhang, Q.C., Li, Y., Liang, F., Zhao, Y.H., Zhu, Y.T., Chen, X., Friction anisotropy and associated surface deformation mechanisms in heterogeneous copper/bronze laminates. Materials Characterization, 2024. 208: 113644.
219. Nie, J.F.*, Chen, Y.Y., Cao, Y.*, Xie, K.W., Liu, S.D., Liu, X.F., Zhao, Y.H.*, Zhu, Y.T.*, Enhancing strength and ductility of Al-matrix composite via a dual-heterostructure strategy. International Journal of Plasticity, 2023. 171: 103825.
218. Meng, A., Liang, F., Lin, Y., Chen, X.*, Zhao, Y.H.*, Tribo-induced microstructural changes and associated wear mechanisms of CoFeNi2 medium entropy alloy at elevated temperatures. Tribology International, 2023. 189: 108892.
217. Meng, A., Chen, X.*, Guo, Y.Z., Lu, Y.P.*, Zhao, Y.H.*, Dislocation mediated dynamic tension-compression asymmetry of a Ni2CoFeV0.5Mo0.2 medium entropy alloy. Journal of Materials Science & Technology, 2023. 159: 204-218.
216. Gao, X.Z., Jiang, W., Lu, Y.P.*, Liu, W., Sha, G., Wang, T.M., Li, T.J., Chang, I.T.H., Zhao, Y.H.*, Excellent strength-ductility combination of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at cryogenic temperatures. JMST, 2023. 154: 166-177.
215. Gu, L., Hou, R., Liu, Y., Chen, G.*, Liu, J.H., Zheng, G., Zhao, Y.H.*, Strengthening and toughening bulk Ni2CoFeV0.5 medium-entropy alloy via thermo-mechanical treatment. Journal of Materials Science & Technology, 2023. 151: 19-29.
214. Jiang, M.Q., Wu, Y.L., Nie, J.F.*, Liu, X.F., Zhao, Y.H.*, Revealing the ultra-high high-temperature compressive mechanical properties and deformation mechanism of a heterostructured AlNp/Al nanocomposite. MSEA, 2023. 878: 145199.
213. Gu, L., Meng, A., Chen, X.*, Zhao, Y.H.*, Simultaneously enhancing strength and ductility of HCP titanium via multi-modal grain induced extra <c+a> dislocation hardening. Acta Materialia, 2023. 252: 118949.
212. Jiang, W., Wang, H., Li, Z.M., Zhao, Y.H.*, Enhanced mechanical properties of a carbon and nitrogen co-doped interstitial high-entropy alloy via tuning ultrafine-grained microstructures. JMST, 2023. 144: 128-137.
211. Wang, L.L., Zhou, J.Q.*, Cao, Y.*, Zhao, Y.H.*, Unconventional dislocation starvation behavior of medium-entropy alloy single crystal pillars containing pre-existing dislocations. Journal of Materials Science & Technology, 2023. 142: 60-75.
210. Meng, A., Liang, F., Gu, L., Chen, X.*, Zhao, Y.H.*, An exceptionally wear-resistant CoFeNi2 medium entropy alloy via tribo-induced nanocrystallites with amorphous boundaries. Applied Surface Science, 2023. 614: 156102.
209. Liang, N.N., Zhao, Y.H.*, A review on thermal stability of nanostructured materials. Journal of Alloys and Compounds, 2023. 938: 168528.
208. Ren, J.-C., Zhou, J.J., Butch, C.J., Ding, Z.G., Li, S., Zhao, Y.H., Liu, W., Predicting single-phase solid solutions in as-sputtered high entropy alloys: High-throughput screening with machine-learning model. JMST, 2023. 138: 70-79.
207. Gu, L., Liang, N.N., Zhang, D.M., Liu, J.H., Zhao, Y.H.*, Tailoring microstructure of Ni2CoFe medium-entropy alloy to achieve optimal comprehensive mechanical properties. Journal of Materials Research and Technology, 2023. 23: 4258-4267.
206. Jiang, W., Cao, Y., Yuan, S.Y., Zhang, Y., Zhao, Y.H.*, Creep properties and deformation mechanisms of a Ni2Co1Fe1V0.5Mo0.2 medium-entropy alloy. Acta Materialia, 2023. 245: 118590.
205. Wei, K., Xiao, L.R., Gao, B., Mao, Q.Z., Liu, Y., Li, L., Sui, Y.D., Zhou, H.*, Zhao, Y.H.*, Effect of aging temperature on the hardening behavior and precipitation evolution of Mg-10Gd alloy. Materials Characterization, 2023. 196: 112580.
204. Xu, R.R., Li, M.Q., Zhao, Y.H.*, A review of microstructure control and mechanical performance optimization of γ-TiAl alloys. Journal of Alloys and Compounds, 2023. 932: 167611.
202. Yang, Y., Meng, A., Chen, X., Zhao, Y.H.*, Tribo-induced surface deformation mechanisms govern friction and wear in ultra-light HCP and duplex Mg–Li alloys. Wear, 2022. 510-511: 204507.
201. Gu, L., Liang, N.N., Liu, Y., Chen, Y.Y., Liu, J.H., Sun, Y.X., Zhao, Y.H.*, Novel as-cast NiAlCoFeNb dual-phase high-entropy alloys with high hardness. Materials Letters, 2022. 324: 132676.
200. Zhao, Y.H.*, Mao, Q.Z., Toughening of Nanostructured Metals. Acta Metall Sin, 2022. 58(11): 1385-1398.
199. Li, S., Li, J.Y., Jiang, Z.W., Zou, Y., Zhao, Y.H., Oliveira, J.P., Zhang, Y., Wang, K.H., Controlling the columnar-to-equiaxed transition during Directed Energy Deposition of Inconel 625. Additive Manufacturing, 2022. 57: 102958.
198. Bai, J., Jin, S.B., Liang, C., Li, X., You, Z.S., Zhao, Y.H., Liu, L.H., Sha, G., Microstructural origins for quench cracking of a boron steel: Boron distribution. Materials Characterization, 2022. 190: 112022.
197. Liang, N.N., Xu, R.R., Wu, G.Z., Gao, X.Z., Zhao, Y.H.*, High thermal stability of nanocrystalline FeNi2CoMo0.2V0.5 high-entropy alloy by twin boundary and sluggish diffusion. Materials Science and Engineering: A, 2022. 848: 143399.
196. Gu, L., Liang, N.N.*, Chen, Y.Y., Zhao, Y.H.*, Achieving maximum strength-ductility combination in fine-grained Cu-Zn alloy via detwinning and twinning deformation mechanisms. Journal of Alloys and Compounds, 2022. 906: 164401.
195. Jiang, W., Cao, Y., Zhao, Y.H.*, Charpy impact behavior and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at ambient and cryogenic temperatures. Materials Science and Engineering: A, 2022. 837: 142735.
194. Mao, Q.Z., Liu, Y.F., Zhao, Y.H.*, A review on mechanical properties and microstructure of ultrafine grained metals and alloys processed by rotary swaging. Journal of Alloys and Compounds, 2022. 896: 163122.
193. Shi, S.J., Dai, L.J., Zhao, Y.H.*, Ternary relation among stacking fault energy, grain size and twin nucleation size in nanocrystalline and ultrafine grained CuAl alloys. Journal of Alloys and Compounds, 2022. 896: 162953.
192. Mao, Q.Z., Wang, L., Nie, J.F., Zhao, Y.H.*, Enhancing strength and electrical conductivity of Cu–Cr composite wire by two-stage rotary swaging and aging treatments. Composites Part B: Engineering, 2022. 231: 109567.
191. Xu, R.R., Wei, D.J., Zhao, Y.H.*, Microstructure and mechanical behaviors of Al/Cu laminated composites fabricated by accumulative roll bonding and intermediate annealing. Materials Science and Engineering: A, 2022. 832: 142510.
190. Jiang, W., Zhu, Y.T., Zhao, Y.H.*, Mechanical properties and deformation mechanisms of heterostructured high-entropy and medium-entropy alloys: A review. Frontiers in Materials, 2022. 8: 792359.
189. Sun, X.D., Nie, J.F.*, Liu, X.F., Zhao, Y.H.*, Microstructure and enhanced cryogenic tensile property of a heterostructured AleAlN/AleMg composite fabricated by accumulative roll bonding (ARB). JMRT, 2022. 21(532): e545.
188. Liu, Y.F., Zang, Y., Cao, Y., Liu, W., Mao, Q.Z., zhou, H., Jiang, W., Zhao, Y.H., Zhu, Y.T., Significance of surface layer integrity for sustaining the ductility of gradient-structured nickel. Materials Letters, 2021. 303: 130491.
187. Chen, X.*, Ma, Y.*, Yang, Y., Meng, A., Han, Z.X., Han, Z., Zhao, Y.H.*, Revealing tribo–oxidation mechanisms of the copper–WC system under high tribological loading. Scripta Materialia, 2021. 204: 114142.
186. Jiang, W., Gao, X.Z., Guo, Y.Z., Chen, X.*, Zhao, Y.H.*, Dynamic impact behavior and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 high-entropy alloy. Materials Science and Engineering: A, 2021. 824: 141858.
185. Chen, X., Liu, C.M., Wan, Y.C., Jiang, S.N., Chen, Z.Y., Zhao, Y.H., Grain refinement mechanisms in gradient nanostructured AZ31B Mg alloy prepared via rotary swaging. Metallurgical and Materials Transactions A, 2021. 52(9): 4053-4065.
184. Wang, L.L., Liu, J.L., Zhou, J.Q.*, Zhao, Y.H.*, Influences of strain rate, Al concentration and grain heterogeneity on mechanical behavior of CoNiFeAlxCu1-x high-entropy alloys: a molecular dynamics simulation. JMRT, 2021. 14: 2071-2084.
183. Mao, Q.Z., Chen, X.*, Li, J.S., Zhao, Y.H.*, Nano-gradient materials prepared by rotary swaging. Nanomaterials, 2021. 11(9): 2223.
182. Jiang, Z.W., Zhu, L.L., Yu, L.X., Sun, B.A., Cao, Y., Zhao, Y.H.*, Zhang, Y.*, The mechanism for the serrated flow induced by Suzuki segregation in a Ni alloy. Materials Science and Engineering: A, 2021. 820: 141575.
181. Jiang, W., Yuan, S.Y., Cao, Y.*, Zhang, Y.*, Zhao, Y.H.*, Mechanical properties and deformation mechanisms of a Ni2Co1Fe1V0.5Mo0.2 medium-entropy alloy at elevated temperatures. Acta Materialia, 2021. 213: 116982.
180. Yang, Y., Chen, X.*, Nie, J.F.*, Wei, K., Mao, Q.Z., Lu, F.H., Zhao, Y.H.*, Achieving ultra-strong Magnesium–lithium alloys by low-strain rotary swaging. Materials Research Letters, 2021. 9(6): 255-262.
179. Mao, Q.Z., Zhang, Y.S., Guo, Y.Z., Zhao, Y.H.*, Enhanced electrical conductivity and mechanical properties in thermally stable fine-grained copper wire. Communications Materials, 2021. 2(1): 46.
178. Zhao, Y.H.*, In situ thermomechanical processing to avoid grain boundary precipitation and strength-ductility loss of age hardening alloys. Transactions of Nonferrous Metals Society of China, 2021. 31(5): 1205-1216.
177. Jiang, W., Cao, Y.*, Jiang, Y.d., Mao, Q.Z., Zhou, H., Zhao, Y.H.*, Effects of nanostructural hierarchy on the hardness and thermal stability of an austenitic stainless steel. Journal of Materials Research and Technology, 2021. 12: 376-384.
176. Meng, A., Chen, X.*, Nie, J.F., Gu, L., Mao, Q.Z., Zhao, Y.H.*, Microstructure evolution and mechanical properties of commercial pure titanium subjected to rotary swaging. Journal of Alloys and Compounds, 2021. 859: 158222.
175. Mao, Q.Z., Zhang, Y.S., Liu, J.Z., Zhao, Y.H.*, Breaking material property trade-offs via macrodesign of microstructure. Nano Letters, 2021. 21(7): 3191-3197.
174. Zhao, Y.H.*, Gu, Y.L., Deformation mechanisms and plasticity of ultrafine-grained Al under complex stress state revealed by digital image correlation technique. Nanotechnology Reviews, 2021. 10(1): 73-86.
173. Liu, S.L., Yin, J., Zhao, Y.H.*, Revealing twinning from triple lines in nanocrystalline copper via molecular dynamics simulation and experimental observation. Journal of Materials Research and Technology, 2021. 11: 342-350.
172. Wei, K., Hu, R., Yin, D.D., Xiao, L.R., Pang, S., Cao, Y., Zhou, H.*, Zhao, Y.H.*, Zhu, Y.T.*, Grain size effect on tensile properties and slip systems of pure magnesium. Acta Materialia, 2021. 206: 116604.
171. Zhao, Y.H.*, Gu, Y.L., Guo, Y.Z.*, Plasticity and deformation mechanisms of ultrafine-grained Ti in necking region revealed by digital image correlation technique. Nanomaterials, 2021. 11(3): 574.
170. Zhao, Y.H.*, Liu, J.Z.*, Topping, T.D., Lavernia, E.J., Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation. Journal of Alloys and Compounds, 2021. 851: 156931.
169. Nie, J.F., Liu, Y.F., Wang, F., Zhou, H., Cao, Y., Liu, X.F., Zhu, Y.T., Zhao, Y.H., Key roles of particles in grain refinement and material strengthening for an aluminum matrix composite. Materials Science and Engineering: A, 2021. 801: 140414.
168. Liu, S.L., Zhao, Y.H.*, Mechanical properties, deformation and fracture mechanisms of bimodal Cu under tensile test. Reviews on Advanced Materials Science, 2021. 60: 15-24.
167. Liu, S.L., Zhao, Y.H.*, Revealing grain coarsening and detwinning in bimodal Cu under tension. Reviews on Advanced Materials Science, 2021. 60(1): 15-24.
166. Nie, J.F.*, Chen, Y.Y., Chen, X., Liu, X.F.*, Liu, G.L., Zhao, Y.H.*, Zhu, Y.T., Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets. Scripta Materialia, 2020. 189: 140-144.
165. Wei, K., Xiao, L.R., Gao, B., Li, L., Liu, Y., Ding, Z.G., Liu, W., Zhou, H.*, Zhao, Y.H.*, Enhancing the strain hardening and ductility of Mg-Y alloy by introducing stacking faults. Journal of Magnesium and Alloys, 2020. 8(4): 1221-1227.
164. Liu, X.R., Zhuang, L.M., Zhao, Y.H.*, Microstructure and mechanical properties of ultrafine-grained copper by accumulative roll bonding and subsequent annealing. Materials, 2020. 13(22): 5171.
163. Wan, Y.C., Tang, B., Gao, Y.H., Sha, G., Zhang, B., Liang, N.N., Liu, C.M.*, Jiang, S.N., Chen, Z.Y., Guo, X.Y.*, Zhao, Y.H.*, Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging. Acta Materialia, 2020. 200: 274-286.
162. Liu, S.L., Guo, Y.Z., Lavernia, E.J., Zhu, Y.T., Wei, Q.M., Zhao, Y.H.*, Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal. Journal of Materials Science & Technology, 2020. 54: 31-39.
161. Liang, N.N., Wang, X., Cao, Y.*, Li, Y.S., Zhu, Y.T., Zhao, Y.H.*, Effective surface nano-crystallization of Ni2FeCoMo0.5V0.2 medium entropy alloy by rotationally accelerated shot peening (RASP). Entropy, 2020. 22(10): 1074.
160. Song, L., Lu, F.H., Jin, F., Nie, J.F.*, Liu, G.L., Zhao, Y.H.*, Effect of cold and warm rolling on the particle distribution and tensile properties of heterogeneous structured AlN/Al nanocomposites. Materials, 2020. 13(18): 4001.
159. Gao, X.Z., Dai, L.J., Zhao, Y.H.*, Twin boundary-dislocation interactions in nanocrystalline Cu-30% Zn alloys prepared by high pressure torsion. Journal of Materials Research and Technology, 2020. 9(5): 11958-11967.
158. Liu, Y.F., Cao, Y., Mao, Q.Z., Zhao, Y.H., Jiang, W., Liu, Y., Wang, J.T., You, Z.S., Zhu, Y.T., Critical microstructures and defects in heterostructured materials and their effects on mechanical properties. Acta Materialia, 2020. 189: 129-144.
157. Gu, L., Zhao, Y.*, Revealing intrinsic lattice expansion and grain boundary excess volume of nanocrystalline Se prepared via various methods. Materialia, 2020. 9: 100535.
156. Nie, J.F.*, Lu, F.H., Zhou, H., Chen, C., Chen, X., Yang, H.B., Cao, Y., Liu, X.F.*, Zhao, Y.H.*, Zhu, Y.T., Improving the high-temperature ductility of Al composites by tailoring the nanoparticle network. Materialia, 2020. 9: 100523.
155. Chen, Y.Y., Nie, J.F.*, Zhao, Y.H.*, Revealing hetero-deformation induced (HDI) stress strengthening effect in laminated Al-(TiB2+TiC)p/6063 composites prepared by accumulative roll bonding. Journal of Alloys and Compounds, 2020. 815: 152285.
154. Zhao, Y.H.*, Liao, X.Z., Zhu, Y.T., Lavernia, E.J., Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing. Materials Science and Engineering: A, 2020. 772: 138706.
153. Lu, F.H., Nie, J.F., Zhao, Y.H., Liu, X.F., Simultaneously improving the tensile strength and ductility of the AlNp/ Al composites by the particle's hierarchical structure with bimodal distribution and nano-network. MSEA. 2020, 770: 138519.
152. Liu, Y.F., Cao, Y., Zhao, Y.H., Zhu, Y.T., Mechanical properties and microstructures of commercial-purity aluminum processed by rotational accelerated shot peening plus cold rolling. Advanced Engineering Materials, 2020. 22(1): 1900478.
151. Jiang, W., Zhou, H., Cao, Y., Nie, J.F., Li, Y.S., Zhao, Y.H., Kawasaki, M., Langdon, T.G., Zhu, Y.T., On the heterogeneity of local shear strain induced by high-pressure torsion. Advanced Engineering Materials, 2020. 22(1): 1900477.
150. Gao, X.Z., Lu, Y.P.*, Liu, J.Z.*, Wang, J., Wang, T.M., Zhao, Y.H.*, Extraordinary ductility and strain hardening of Cr26Mn20Fe20Co20Ni14 TWIP high-entropy alloy by cooperative planar slipping and twinning. Materialia, 2019. 8: 100485.
149. Nie, J.F.*, Wang, F., Chen, Y.Y., Mao, Q.Z., Yang, H.B., Song, Z.W., Liu, X.F., Zhao, Y.H.*, Microstructure and corrosion behavior of Al-TiB2/TiC composites processed by hot rolling. Results in Physics, 2019. 14: 102471.
148. Meng, A., Nie, J.F.*, Wei, K., Kang, H.J., Liu, Z.J., Zhao, Y.H.*, Optimization of strength, ductility and electrical conductivity of a Cu–Cr–Zr alloy by cold rolling and aging treatment. Vacuum, 2019. 167: 329-335.
147. Li, Y.S., Dai, L.J., Cao, Y., Zhao, Y.H., Zhu, Y.T., Grain size effect on deformation twin thickness in a nanocrystalline metal with low stacking-fault energy. Journal of Materials Research, 2019. 34(13): 2398-2405.